27 Nov 2013: 3D PCB View

Here is a quick 3D PCB Rendering of the EOMA-68 Router. Connectors along the left edge are Dual-USB, 4 Gigabit Ethernet and RS232. Behind those is room for an Ax5300 POE Module. Along the bottom edge is then a 5.5mm Power Jack, SATA and VGA connectors. At the far left edge is an 8-pin Expansion connector with 4 pins GPIO, 5V power and I2C.

On the underside at the top, the USB-based 3G MiniPCIe can be seen, as well as the two SIM sockets. At the bottom, partially obscured by the SATA and EOMA68 is the USB-based WIFI MiniPCIe socket.